Use eglot for c-mode

emacs/.emacs.d/config/init-elisp.el

@@ -4,6 +4,184 @@
   :straight (:type built-in)
   :general
   (emacs-lisp-mode-map "C-c C-c" #'eval-defun
-                       "C-c C-k" #'eval-buffer))
+                       "C-c C-k" #'eval-buffer)
+  :config
+  ;; Indent quoted lists in a nicer way
+  (advice-add #'calculate-lisp-indent :override #'void~calculate-lisp-indent)
+
+  (defun void~calculate-lisp-indent (&optional parse-start)
+    "Add better indentation for quoted and backquoted lists."
+    ;; This line because `calculate-lisp-indent-last-sexp` was defined with `defvar`
+    ;; with it's value ommited, marking it special and only defining it locally. So
+    ;; if you don't have this, you'll get a void variable error.
+    (defvar calculate-lisp-indent-last-sexp)
+    (save-excursion
+      (beginning-of-line)
+      (let ((indent-point (point))
+            state
+            ;; setting this to a number inhibits calling hook
+            (desired-indent nil)
+            (retry t)
+            calculate-lisp-indent-last-sexp containing-sexp)
+        (cond ((or (markerp parse-start) (integerp parse-start))
+               (goto-char parse-start))
+              ((null parse-start) (beginning-of-defun))
+              (t (setq state parse-start)))
+        (unless state
+          ;; Find outermost containing sexp
+          (while (< (point) indent-point)
+            (setq state (parse-partial-sexp (point) indent-point 0))))
+        ;; Find innermost containing sexp
+        (while (and retry
+                    state
+                    (> (elt state 0) 0))
+          (setq retry nil)
+          (setq calculate-lisp-indent-last-sexp (elt state 2))
+          (setq containing-sexp (elt state 1))
+          ;; Position following last unclosed open.
+          (goto-char (1+ containing-sexp))
+          ;; Is there a complete sexp since then?
+          (if (and calculate-lisp-indent-last-sexp
+                   (> calculate-lisp-indent-last-sexp (point)))
+              ;; Yes, but is there a containing sexp after that?
+              (let ((peek (parse-partial-sexp calculate-lisp-indent-last-sexp
+                                              indent-point 0)))
+                (if (setq retry (car (cdr peek))) (setq state peek)))))
+        (if retry
+            nil
+          ;; Innermost containing sexp found
+          (goto-char (1+ containing-sexp))
+          (if (not calculate-lisp-indent-last-sexp)
+              ;; indent-point immediately follows open paren.
+              ;; Don't call hook.
+              (setq desired-indent (current-column))
+            ;; Find the start of first element of containing sexp.
+            (parse-partial-sexp (point) calculate-lisp-indent-last-sexp 0 t)
+            (cond ((looking-at "\\s(")
+                   ;; First element of containing sexp is a list.
+                   ;; Indent under that list.
+                   )
+                  ((> (save-excursion (forward-line 1) (point))
+                      calculate-lisp-indent-last-sexp)
+                   ;; This is the first line to start within the containing sexp.
+                   ;; It's almost certainly a function call.
+                   (if (or
+                        ;; Containing sexp has nothing before this line
+                        ;; except the first element. Indent under that element.
+                        (= (point) calculate-lisp-indent-last-sexp)
+
+                        ;; First sexp after `containing-sexp' is a keyword. This
+                        ;; condition is more debatable. It's so that I can have
+                        ;; unquoted plists in macros. It assumes that you won't
+                        ;; make a function whose name is a keyword.
+                        ;; (when-let (char-after (char-after (1+ containing-sexp)))
+                        ;;   (char-equal char-after ?:))
+
+                        ;; Check for quotes or backquotes around.
+                        (let* ((positions (elt state 9))
+                               (last (car (last positions)))
+                               (rest (reverse (butlast positions)))
+                               (any-quoted-p nil)
+                               (point nil))
+                          (or
+                           (when-let (char (char-before last))
+                             (or (char-equal char ?')
+                                 (char-equal char ?`)))
+                           (progn
+                             (while (and rest (not any-quoted-p))
+                               (setq point (pop rest))
+                               (setq any-quoted-p
+                                     (or
+                                      (when-let (char (char-before point))
+                                        (or (char-equal char ?')
+                                            (char-equal char ?`)))
+                                      (save-excursion
+                                        (goto-char (1+ point))
+                                        (looking-at-p
+                                         "\\(?:back\\)?quote[\t\n\f\s]+(")))))
+                             any-quoted-p))))
+                       ;; Containing sexp has nothing before this line
+                       ;; except the first element.  Indent under that element.
+                       nil
+                     ;; Skip the first element, find start of second (the first
+                     ;; argument of the function call) and indent under.
+                     (progn (forward-sexp 1)
+                            (parse-partial-sexp (point)
+                                                calculate-lisp-indent-last-sexp
+                                                0 t)))
+                   (backward-prefix-chars))
+                  (t
+                   ;; Indent beneath first sexp on same line as
+                   ;; `calculate-lisp-indent-last-sexp'.  Again, it's
+                   ;; almost certainly a function call.
+                   (goto-char calculate-lisp-indent-last-sexp)
+                   (beginning-of-line)
+                   (parse-partial-sexp (point) calculate-lisp-indent-last-sexp
+                                       0 t)
+                   (backward-prefix-chars)))))
+        ;; Point is at the point to indent under unless we are inside a string.
+        ;; Call indentation hook except when overridden by lisp-indent-offset
+        ;; or if the desired indentation has already been computed.
+        (let ((normal-indent (current-column)))
+          (cond ((elt state 3)
+                 ;; Inside a string, don't change indentation.
+                 nil)
+                ((and (integerp lisp-indent-offset) containing-sexp)
+                 ;; Indent by constant offset
+                 (goto-char containing-sexp)
+                 (+ (current-column) lisp-indent-offset))
+                ;; in this case calculate-lisp-indent-last-sexp is not nil
+                (calculate-lisp-indent-last-sexp
+                 (or
+                  ;; try to align the parameters of a known function
+                  (and lisp-indent-function
+                       (not retry)
+                       (funcall lisp-indent-function indent-point state))
+                  ;; If the function has no special alignment
+                  ;; or it does not apply to this argument,
+                  ;; try to align a constant-symbol under the last
+                  ;; preceding constant symbol, if there is such one of
+                  ;; the last 2 preceding symbols, in the previous
+                  ;; uncommented line.
+                  (and (save-excursion
+                         (goto-char indent-point)
+                         (skip-chars-forward " \t")
+                         (looking-at ":"))
+                       ;; The last sexp may not be at the indentation
+                       ;; where it begins, so find that one, instead.
+                       (save-excursion
+                         (goto-char calculate-lisp-indent-last-sexp)
+                         ;; Handle prefix characters and whitespace
+                         ;; following an open paren.  (Bug#1012)
+                         (backward-prefix-chars)
+                         (while (not (or (looking-back "^[ \t]*\\|([ \t]+"
+                                                       (line-beginning-position))
+                                         (and containing-sexp
+                                              (>= (1+ containing-sexp) (point)))))
+                           (forward-sexp -1)
+                           (backward-prefix-chars))
+                         (setq calculate-lisp-indent-last-sexp (point)))
+                       (> calculate-lisp-indent-last-sexp
+                          (save-excursion
+                            (goto-char (1+ containing-sexp))
+                            (parse-partial-sexp (point) calculate-lisp-indent-last-sexp 0 t)
+                            (point)))
+                       (let ((parse-sexp-ignore-comments t)
+                             indent)
+                         (goto-char calculate-lisp-indent-last-sexp)
+                         (or (and (looking-at ":")
+                                  (setq indent (current-column)))
+                             (and (< (line-beginning-position)
+                                     (prog2 (backward-sexp) (point)))
+                                  (looking-at ":")
+                                  (setq indent (current-column))))
+                         indent))
+                  ;; another symbols or constants not preceded by a constant
+                  ;; as defined above.
+                  normal-indent))
+                ;; in this case calculate-lisp-indent-last-sexp is nil
+                (desired-indent)
+                (t
+                 normal-indent)))))))
 
 (provide 'init-elisp)

emacs/.emacs.d/config/init-ide.el

@@ -42,9 +42,15 @@
                                    '(("vscode-html-language-server" "--stdio")
                                      ("html-languageserver" "--stdio")))))
   ;; Support jdtls' ability to jump into class files
-  (add-to-list 'eglot-server-programs '(java-mode . ("jdtls" :initializationOptions
+  (add-to-list 'eglot-server-programs
+               '(java-mode . ("jdtls" :initializationOptions
                               (:extendedClientCapabilities
-                                                      (:classFileContentsSupport t)))))
+                               (:classFileContentsSupport t)
+                               :runtimes [(:name "JavaSE-11"
+                                           :path "/Library/Java/JavaVirtualMachines/amazon-corretto-11.jdk")
+                                          (:name "JavaSE-17"
+                                           :path "/Library/Java/JavaVirtualMachines/amazon-corretto-17.jdk"
+                                           :default t)]))))
   (defun jdt-class-file-name-handler (operation &rest args)
     "File name handler for jdtls' `jdt://' URIs."
     (cond
@@ -102,6 +108,20 @@
   (setq eglot-extend-to-xref t)
   (add-to-list 'file-name-handler-alist '("\\`jdt://" . jdt-class-file-name-handler))
   (add-to-list 'auto-mode-alist '("\\`jdt://" . java-mode))
+  ;; Java build command
+  (defun eglot-java-maven-build ()
+    (interactive)
+    (if-let ((pom-path (locate-dominating-file default-directory "pom.xml")))
+        (let ((pom-uri (eglot--path-to-uri pom-path)))
+          (jsonrpc-notify
+           (eglot--current-server-or-lose)
+           :java/projectConfigurationUpdate
+           (list :uri pom-uri))
+          (jsonrpc-notify
+           (eglot--current-server-or-lose)
+           :java/buildWorkspace
+           '((:json-false))))
+      (user-error "This doesn't appear to be a Maven project, could not find pom.xml.")))
   :init
   (defvar eglot-prefix-map (make-sparse-keymap)
     "Prefix keymap for eglot commands.")
@@ -125,7 +145,8 @@
   (python-mode . eglot-ensure)
   (js-web-mode . eglot-ensure)
   (html-web-mode . eglot-ensure)
-  (scala-mode . eglot-ensure))
+  (scala-mode . eglot-ensure)
+  (c-mode . eglot-ensure))
 
 ;; Some compilation-mode conveniences
 (use-package compile

homebrew/Brewfile

@@ -16,6 +16,7 @@ brew "isync"
 brew "jdtls"
 brew "jq"
 brew "kubectx"
+brew "llvm"
 brew "maven"
 brew "metals"
 brew "msmtp"